Haier P42A9-AKS Owner's Manual

Haier P42A9-AKS Owner's Manual Manual pdf 14 page image

VGA AUDIOVGA INAUDIO OUTL RHow to connect1. To get the best picture quality, adjust the PCgraphics card to (>10242. Use the TV`s VGA port for videoconnections, depending on your PC connector.If the graphic card on the PC does not outputanalog and digital RGB simultaneously, connectonly one of eitherVGA to display the PC on theTV.If the graphic card on the PC does outputanalog and digital RGB simultaneously, set theTV to eithe ; (the other mode is set to Plugand Play automatically by the TV.)3. Then, make the corresponding audioconnection. If using a sound card, adjust the PCsound as required.How to use1. Turn on the PC and the TV.2. Turn on the display by pressing the POWERbutton on the TV's remote control.3. Use TV/AV on the remote control to select PC.x768),60Hz.ININr VGAExternal Equipment ConnectionsPC connectionor DVI source.4. Check the image on your TV. There maybe noise associated with the resolution,vertical pattern, contrast or brightness inPC mode. If noise is present, change thePC mode to another resolution, changethe refresh rate to another rate or adjustthe brightness and contrast on the menuuntil the picture is clear. If the refresh rateof the PC graphic card can not be changed,change the PC graphic card or consult themanufacturer of the PC graphic card.NOTES:1 Use a VGAcable.2 Avoid keeping a fixed image on the TV'sscreen for a long period of time. The fixedi m a g e m a y b e c o m e p e r m a n e n t l yimprinted on the screen.3 The synchronization input form forHorizontal and Vertical frequencies isseparate.ResolutionFramefrequency(Hz)Linefrequency(Khz)VGASVGAXGA640*480 31.5KHz 60Hz800*600 37.9KHz 60Hz1024*768 48.4KHz 60HzMode Resolution