ANT INCOMPONENT INPr/Cr Pb/Cb Y L-AUDIO-R SCART2 SCART1External Equipment Connection- To avoid picture noise (interference), leave an adequate distance between the VCRAnd TV.VCR connectionNOTE: All cables shown are not included with the TV.1. Connect the SCART cables fromthe VCR's output jacks to the TV`sinput jacks, as shown in the figure.2. Insert a video tape into the VCR andpress PLAY on the VCR. (Refer to the VCRowner`s manual.)3. Select the input sourceby the TV/AV buttonon the remote control.S-VIDEOChoose Your ConnectionThere are several ways to connect your television, depending on the components youwant to connect and the quality of the signal you want to achieve. The following areexamples of some ways to connect your TV.Choose the connection which is best for you.