Haier SYJS-0308 Service Manual

Also see for AB092FCAHA: Operation and installation manual

Haier SYJS-0308 Service Manual Manual pdf 64 page image

1. Read function symbolPress “read” button , “1” flashes 1 time2. Signal emitting symbolwhen “2” flashes ,it shows that remote controller is givingsignal to indoor unit.3. Indoor unit numberpress “8”button to select indoor unit number (1,2,3,4,5or6),then “3” flashes continuously ,press “7” to set indoor unitnumber4. Button locked symbolWhen “9” is on the state of “ ↗”,press “10”button , “4”appears to show other buttons are locked .press“10”again to cancel5 Code symbolpress “9 ”button to select code type , When “5” is on the stateof “↘” ,the emitting code to indoor unit is for product made in1998.6 Read buttonPress this button to give indoor unit signal , the powerLED flashes to show indoor unit number.7 Indoor unit number setting buttonWhen “3” is continuously flashes ,Press thisbutton and give signal to indoor unit to setthe number selected.8 Indoor unit number selection buttonuse these 6 buttons to select indoor unit number to be set9 Code selection buttonUse this button to select emitting code typeNormally “5” is on the state of “↗”.10 Lock buttonPress this button , “4”appears ,the other buttons will be locked11 Reset ButtonWhen the remote controller is abnormal , press this button withpointed things to reset.RESETNO.4READNO.1 NO.3NO.2NO.5LOCKNO.6SELECTSETREAD123 4 5 6 7 8 9 10 116.1.2 Function of special remote controller (Adress setting)