Haier WP-09LD03 Operation Manual

Also see for HW-18CK03: Technical manual

Contents

8Operation(5) Air flow direction adjustmentAfter operation mode is selected, vertical flap will open automatically according to the mode.Referring to the Fig.COOLHEATCOOL HEATAbout 10oAbout 10obetter set a temp. difference of 3-5oC between indoor and outdoor temp. in COOL mode.HintsAs cold air flows downward in COOL mode, adjusting air flow horizontally will be much morehelpful for a better air circulation.As warm air flows upward in HEAT mode, adjusting air flow downward will be much morehelpful for a better air circulation.Be careful not to catch a cold when cold air blows downward.It is harmful to your health in summer to go frequently in and out of places where temp.difference is above 7oC. Temp. difference of 3-5oC will remove your fatigue.More than this, unit's load can be reduced and power consumption cut down as well. So, you'd(6) Unit stopPress ON/OFF button.Only time remains on LCD.All indicators on indoor unit go out.Vertical flap closes automatically.Cautions:Unit won't restart until 3 minutes haveelapsed, due to system protection.HEAT mode is not available oncooling only unit.It is advisable not to keep vertical flap atdownward position for a long time in COOLor DRY mode, otherwise, condensatewater might occur.Cautions: Cautions:When humidity is high, condensate watermight occur at air outlet if all horizontallouvers are adjusted to left or right.Move the horizontal blade by a knob on airconditioner to adjust left and right directionreferring to Fig.Left and right air flow adjustment(manual)Press SWING button, vertical flap will move withinthe range shown in the Fig. Press SWING buttonstop it at a fixed position.Up and down (Use remote controller)About 45oAbout 60oAbout 60o