Haldex S-ABA Service Manual
                    | |
Haldex strongly recommends that routine visual/operational checks,including brackets and control arms, be performed at each PreventativeMaintenance Service Interval.Adjusters or anchor brackets that have visual damage, or which failthe operational checks, MUST be replaced immediately.Automatic adjusters should not be operated as manual adjusters except asmay be necessary to get the vehicle off the road for service.6Routine Visual / Operational ChecksService and Lubrication Intervals forStandard Haldex AA1 and S-ABA Brake AdjustersNote: No-LubeTM automatic brake adjusters are manufactured without a greasefitting and are identified by a 429 prefix.Moly-disulfide grease should not be used because it may affect the function ofthe internal friction clutches and reduce the reliability of the automaticadjustment.In no case should the lubrication interval exceed the published intervalsshown above.AdjusterTypeManufactureDateLubricationIntervalType ofLubricantVisual CheckIntervalStandardAdjuster 409-10...Prior to 6/1/96 50,000 miles orevery 3 monthsStandard ChassisGreaseEach PreventativeMaintenanceService IntervalReduced MaintenanceAdjuster 409-10...After 6/1/96 Once a year Standard ChassisGreaseEach PreventativeMaintenanceService IntervalNo-Lube™Adjuster 429-10...After 6/1/96 None Sealed Unit Each PreventativeMaintenanceService IntervalS-ABAAdjuster 409-20...n/a Once a year Standard ChassisGreaseEach PreventativeMaintenanceService Interval |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine