Hama 00049535 Operating Instruction

Contents

Hama 00049535 Operating Instruction Manual pdf 5 page image

5L Operating Instruction Aadapter for plasma wall bracket, swivel armThis adapter was specially developed for flexible wall mounting of fl at panel displays.This adapter can only be used with the following HAMA LCD/plasma TV wall brackets:HAMA item no. 00049515 “Home Cinema” wall bracket for plasma/LCD, size “S”HAMA item no. 00049516 “FIX” wall bracket for plasma/LCD, size “S”HAMA item no. 00049517 “Home Cinema” wall bracket for plasma/LCDHAMA item no. 00049518 “FIX” wall bracket for plasma/LCDThe adapter can also be used for the following LCD/plasma TV wall bracket:EasyLine item no. 00016864 wall bracket for plasma/LCDThe adapter allows you to expand the wall brackets listed above. The adapter cannot be used alone. Afterassembly, the adapter allows you to swivel an LCD/plasma TV by up to 180° on two joints. The maximum depthcan be varied between approx. 6 cm and 30 cm depending on the setting.Using the adapter does not affect the maximum supported weight of the actual wall bracket. The maximumsupported weights are as follows40 KG for HAMA item no. 0004951540 KG for HAMA item no. 0004951675 KG for HAMA item no. 0004951775 KG for HAMA item no. 0004951875 KG for EasyLine item no. 00016864Safety warning:For proper mounting please have this adapter fitted by a qualified technician! Please check that the assemblyset is complete before installing the adapter and ensure that none of the parts are faulty or damaged. Use thisadapter for the intended purpose and with the approved wall brackets only (see above for the list of approvedbrackets). When installing the adapter, observe the assembly and safety instructions of the wall bracket inparticular.Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for theweight and please make sure that no electrical wires, water, gas or other pipelines are located around theinstallation location.The anchor wall should be made of solid wood or brick. If the wall on which the television is to be mounted ismade of other materials you should buy appropriate installation material from a specialised dealer.Also observe the necessary safety clearance around the TV set (depends on the model). The adapter may notbe mounted at or above locations where persons are able to stand.Once you have mounted the adapter, the wall bracket and the flat screen, check that they are sufficientlysecure and safe to use. You should repeat this check at regular intervals (at least every three months).Hama GmbH & Co. KG does not accept warranty claims if the adapter is not installed properly or for resultingdamage.