10To change the equaliser settings, proceed as follows:• Press [ ] and open “System settings”.• Select the “Equaliser” menu item and confirm theselection by pressing [VOLUME/SELECT/NAVIGATE].• Turn [VOLUME/SELECT/NAVIGATE] to select one ofthe preconfigured profiles. If playback is already startedwhen you modify these settings, you can hear thechanges in the audio immediately.• Confirm the setting by pressing [VOLUME/SELECT/NAVIGATE].My EQ• Press [ ] and open “System settings”.• Select the “My EQ setting” menu item and confirm theselection by pressing [VOLUME/SELECT/NAVIGATE].• Here you can configure the settings for the bass andtreble frequencies of the audio.• Turn [VOLUME/SELECT/NAVIGATE] to the left or rightto change a value. If music is playing while you modifythese settings, you will hear the changes in the audioimmediately.• When you have finished configuring the settings, press[VOLUME/SELECT/NAVIGATE].• Press [ ] to save the settings for the “My EQ” profile.• To use the newly created profile, select the “My EQ”option and confirm by pressing [VOLUME/SELECT/NAVIGATE].14.2 Time settings• Press [ ] and open “System settings”.• Select the “Clock” menu item and confirm the selectionby pressing [VOLUME/SELECT/NAVIGATE].Time and date settings• Turn [VOLUME/SELECT/NAVIGATE] to set the time anddate digit by digit.• Press [VOLUME/SELECT/NAVIGATE] to confirm thesetting of each digit and move to the next.• Press [ ] to save the settings.UpdatingIf automatic time and date adjustment is activated, thedevice receives time and date information from the stationover the FM/DAB/DAB+ radio network. This is the best wayto ensure that the clock will run accurately and the alarmwill trigger at the correct time, even after power outages.From ALL – Time information is retrieved from allavailable sources.From digital radio – Time information is retrieved onlyfrom DAB stations.From FM – Time information is retrieved only from theanalogue radio network.No updating – No time information is retrieved (manualupdating).FormatChoose between 12-hour and 24-hour time formats.Date formatChoose between DD-MM-YYYY and MM-DD-YYYY dateformats.14.3 LightingThe backlight can be configured separately for eachoperating mode (playback mode, standby mode andsnooze mode).Proceed as follows:• Press [ ] and open “System settings”.• Select the “Lighting” menu item and confirm theselection by pressing [VOLUME/SELECT/NAVIGATE].