Hama DR40BT Manual

Also see for DR40BT: Operating instructions

Contents

56.2 LanguageThe first time it is used, the radio's default language isEnglish. Proceed as follows to adjust the language:• Press and hold [Mode/Settings] (5) for around 3seconds to access the Settings menu.• Turn [VOLUME/ENTER/NAVIGATE] to navigate to the"System" menu item.• Confirm the selection by pressing [VOLUME/ENTER/NAVIGATE].• Turning [VOLUME/ENTER/NAVIGATE] takes you tothe "Language" entry. Confirm the selection by pressing[VOLUME/ENTER/NAVIGATE].• Select your preferred system language by turning[VOLUME/ENTER/NAVIGATE].• Confirm this by pressing [VOLUME/ENTER/NAVIGATE].Note• The following languages are available:English, German, Danish, Dutch, Finnish, French,Italian, Norwegian, Polish, Portuguese, Spanish,Swedish, Turkish7. ModesThe menu contains the various operating modes and otherdirect access options that are explained separately in thefollowing chapters:8. FM9. Bluetooth10. Auxiliary Input11. DAB/DAB+12. Sleep13. AlarmThe individual operating modes can also be selected byrepeatedly pressing [ ]/[ ].[ ] [ ]8. Analogue radio (FM/UHF)8.1 Manual station settingWhen you make station settings manually, you can definethe desired frequency yourself and tune into stations thatwere ignored during automatic station search becausetheir signals were too weak.• In FM mode, repeatedly press [ / i ] to switchbetween the volume control and the station setting.• Select the "Set station" menu item and confirm theselection with [VOLUME/ENTER/NAVIGATE].• Turn [VOLUME/ENTER/NAVIGATE] (left: - 0.05 MHz/ right: + 0.05 MHz) until the desired frequency isdisplayed. Wait a moment until playback of the receivedstation signal begins.NoteAfter a few seconds, the radio automatically returns tovolume control. If you do not make any changes to thefrequency setting, you may need to use the [ / i ]button again to access the station settings.