Hama DR7 Operating Instructions Manual

Also see for DR7: Quick guide

Contents

87. FMPress repeatedly [MODE](1) to activate the operatingmode FM:7.1 Scan settingThe search run setting allows you to determine whetherstations with low signal strength are ignored during theautomatic search run.Proceed as follows:• Press [Settings] (3) to access the settings menu.• Turn [Volume/Select/Navigate] (9) to navigate to the‘Station search setting’ menu item.• Confirm your selection by pressing [Volume/Select/Navigate] (9).• Turn and press [Volume/Select/Navigate] (9) to select thedesired setting.To have the search run stop only at stations with highsignal strength, select Strong stations only. Otherwise(All stations), the search run will stop at every station forwhich a signal is received.7.2 Automatic station search• Press [Volume/Select/Navigate] (9) to start the automaticstation search.• The radio stops the search and starts playback when itfinds a station.• Press [Volume/Select/Navigate] (9) again to continue thesearch until the next station is found.7.3 FavouritesYou can save up to 30 of your favourite stations for quickand direct access.7.3.1 Save favourites• Set the station that you would like to save as a favouritestation preset.• If the station is received, press and hold [Preset] on thefront of the radio.• Turn [Volume/Select/Navigate] (9) to switch between thepresets.• Press [Volume/Select/Navigate] (9) to confirm yourselection and store the station on the favourite stationpreset.7.3.2 Access favouritesPress [Preset] to open the overview window with the listof saved stations.• Turn [Volume/Select/Navigate] (9) to navigate to thedesired preset.• Confirm your selection by pressing [Volume/Select/Navigate] (9).Note• Favourites cannot be deleted.• If all 30 station memory slots are filled and you wishto save a new station, choose one of the occupiedslots. The station in this slot will be overwritten withthe new station.7.4 Audio settingFor some stations with a weak signal, quality can beslightly improved by playing them in mono quality. You canenable this function in the menu (Forced mono), and theradio will automatically switch to mono reception whensignal quality is poor.To change the audio setting, proceed as follows:• Press [Settings] (3) to access the settings menu.• Turn [Volume/Select/Navigate] (9) to navigate to the‘Audio setting’ menu item.• Confirm your selection by pressing [Volume/Select/Navigate] (9).• Now select the desired setting.8. Additional settings8.1 SleepThe radio has a timer function that switches the deviceto standby mode after a defined timeinterval.Proceed as follows:• Press [Settings] (3) to access the settings menu.• Turn [Volume/Select/Navigate] (9) to navigate to the‘Sleep’ menu item.• Confirm your selection by pressing [Volume/Select/Navigate] (9).• Turn and press [Volume/Select/Navigate] (9) to select thedesired setting.

/ 14

Related manuals for Hama DR7