57OperationIR100gOperationEach function of the device is selected via a menu consisting ofseveral levels.Initial startup Switch on the device. The main menu appears after a few sec-onds.The functions in the main menu are displayed as symbols on thescreen. To go to a function or open a sub-menu, use the Navigationrotary knob (8a) to select the desired function and subsequentlypress the rotary knob (8b) (SELECT function = "Select" function).During initial startup, the system prompts you to start the SETUPWIZARD. Select YES to begin with the setup.NOTE► Detailed information on the SETUP WIZARD can be found inthe SYSTEM SETTINGS section. If you are using a wired network, you can exit the SETUP WIZ-ARD by selecting NO.The system will then prompt you to start the SETUP WIZARD thenext time the device is switched on.
