Hama QI-FC10 Operating Instructions Manual

8• Place your device with its back on the inductive charger (B).• The charging process begins as soon as an effective induction field has been established. The status LED(2) lights up solid red. The current charge status is displayed on your device.• If no induction connection can be established, change the position of your device if necessary (B).• The charging process ends automatically once your device’s battery is fully charged. The status LED (2)lights up solid blue.5. Care and maintenanceOnly clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners. Ensure that nowater is able to enter the product.NoteDisconnect the device from the mains before cleaning and during prolonged periods of non-use.6. Warranty disclaimerHama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improperinstallation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.7. Technical dataWireless chargerInput 5 V 2.0 A9 V 1.67 AOutput (under optimised conditions) 5 W / 7.5 W / 10 W max.Dimensions Ø 101.5 mm x 6.6 mm8. Declaration of conformityHama GmbH & Co KG hereby declares that the radio equipment type [00201683] is in compliancewith Directive 2014/53/EU. The full text of the EU declaration of conformity is available at thefollowing Internet address:www.hama.com -> 00201683 -> Downloads.Frequency band(s) 100.10 – 160.80kHzMaximum radio-frequency power transmitted 4.05 dBμA/m at 10 m distance