45.2 Manually setting the date/time• Press and hold the wave button (5) for approx. 3seconds to start manually setting the date/time• Set the following information in the order listed:hour, minute, year, month, day• To select the individual values, press the + button(2) or the – button (3) and confirm each selectionby pressing the mode button (4)• If you do not make an entry for 30 seconds, thesettings will automatically close.Note – InputHold down the + button (2) or the – button(3) to select the values faster.5.3 Setting the time format and day ofthe week• Press the + button (2) to switch between the 12and 24-hour formats. In the 12-hour format, AMor PM appears before the time.• To set the language for the day of the weekdisplay, press and hold the – button (3) forapprox. 3 seconds. Press and hold the – button(3) until the language you want is shown.Note – Day of the weekYou can choose from German (GE), English(EN), Italian (IT), Spanish (SP) and French(FR) for the display of the day of the week.5.4. Alarm settings and display• Press the mode button (4) repeatedly until AL1is displayed.• Hold the mode button (4) for approx. 3 seconds.The hours display begins to flash.• Press the + button (2) or the – button (3) toselect the hour for the alarm time and confirmyour selection by pressing the mode button (4).The minutes display begins to flash.• Repeat the process to set the minutes for thealarm time. Once you have confirmed yourminutes selection with the mode button (4),alarm 1 is activated and appears.• You can also set a second alarm time.Press the mode button (4) repeatedly until AL2is displayed and repeat the settings for AL1.• Press the alarm on/off button (6) to activate/deactivate alarm time 1, alarm time 2 or bothat once. The alarm symbols and/or willappear/not appear.• If the alarm is triggered, the correspondingalarm symbol will begin to flash and an alarmwill sound.• Press the alarm on/off button (6) to stop thealarm. Otherwise, it will stop automatically after4 minutes.• If you press the light / snooze button (1) duringthe alarm, the alarm is interrupted for 4 minutesand then goes off again. The correspondingalarm symbol and the snooze symbol ZZwill flash.5.5. Settings and display for a secondtime zone• Press and hold the + button (2) for approx.3 seconds to display the second time zone asthe main time. The ) symbol appears nextto the time.• Press and hold the wave button (5) for approx.3 seconds to set a second time in another timezone. The hours display begins to flash.• Press the + button (2) or the – button (3) tomake the setting and confirm your selection bypressing the mode button (4).