Hama S2100 Operating Instruction

Also see for S2100: Manual

8Operation1. Hotkey Port SelectionAll hotkey port switches begin with tapping the Ctrl key twice.[Ctrl] [Ctrl]2. Invokes Auto Scan ModeStarts Auto Scan. Press and release the [Left Shift] key, and then press the [Right Shift] key.[Left Shift] [Right Shift]Scan IntervalSets the Auto Scan interval to n second intervals - where n is a number from 1 – 4.[Left shift] [Right shift] [n]Note: The n stands for the number of seconds that the focus dwells on a port before switching to the other one.Replace the n with a number between 1 and 4 when entering this hotkey combination. (See the table, below.)Scan Interval Tablen Scan Interval1 3 Sec.2 5 Sec. (default)3 10 Sec.4 20 Sec.Terminates the hotkey mode and the automatic switch-over[Esc] or [space bar]Hotkey key configurationWhen you have activated the hotkey mode [Strg] + [F12], press one of the following buttons to invoke the corresponding function:Key Operation[F1] Recognizes and stores the hardware sided keyboard environment.[F2] Uses the Mac compatible keyboard environment.[F3] Uses the Sun compatible keyboard environment.[F4] Prints out the current assignment for hotkeys, keyboard platformsand language setting.R > [Enter] Resets the hotkey settings to the standard values.00052348bda.indd Abs2:800052348bda.indd Abs2:8 10.07.2008 11:12:14 Uhr10.07.2008 11:12:14 Uhr