Hamamatsu Photonics C9300-124 Instruction Manual

Hamamatsu Photonics C9300-124 Instruction Manual Manual pdf 29 page image

C9300-124 Ver.1.42810-6 DETAIL OF COMMANDS(1) Mode setting commands(Acquire MoDe)Parameter N (Normal)/E (External)Function Selects Free running mode or External control mode for the CCDexposure start timing.AMD N Image acquisition is started in Free running mode.AMDExampleAMD E Image acquisition is started in External control mode.(Normal MoDe)Parameter N (Normal)/S (Shutter)/T (Time)Function Selects mode used to set the exposure time when the exposure timingis controlled internally.NMD N Exposure time is normal readout time at each mode.NMD S Exposure time is set with the SHT command.NMDExampleNMD T Exposure time is set with the AET command.(External MoDe)Parameter E (Edge)/L (Level)/T(Time)/F(Fast repetition)Function Selects mode used to set the exposure time when the exposure timingis controlled External control mode.EMD E Exposure time is set internally with the EST command.EMD L Exposure time is set externally according to external triggerlevel.EMD T Exposure time is set internally with the AET command.EMDExampleEMD F This mode is special fast repetition mode.Please see section 9-3-5 in detail.(Scan MoDe)Parameter N (Normal)/S (Super pixel)/A (Sub-array)Function Selects Normal readout, Binning (super pixel) readout or Sub-arrayreadout.SMD N The data is readout using Normal readout.SMDExampleSMD A The data is readout using Sub-array readout.