Hamilton Beach 840097100 Instruction Manual

Contents

Hamilton Beach 840097100 Instruction Manual Manual pdf 3 page image

To Disassemble: Unplug cord fromoutlet. Unlock both safety latches bypulling out bottom of latch. Removecover, then lift up separator withcutter/strainer.1. Food Pusher2. Food Chute3. Cover4. Cutter/Strainer5. Pulp Bowl6. Separator7. Juice Spout8. Safety Latches9. Power Switch10. Motor Base3Know Your Juice ExtractorBefore First Use: After unpackingthe juice extractor, wash everythingexcept the base in warm, soapywater. Rinse and dry immediately.Never immerse the base in water;wipe it with a damp sponge.Important Information• The juice extractor is manufactured forNORMAL HOUSEHOLD USE. If youhave large quantities, such as 10pounds or more, process in smallbatches, allowing motor to coolcompletely between uses.• When juicing CARROTS, DO NOT PACKfood chute. Place carrots in food chuteone by one, and use gentle pressure.• DO NOT OVERLOAD THE FOODCHUTE. For best results, simply dropfood pieces, one at a time, into chute.Gently and slowly press with foodpusher. This will extract the maximumamount of juice.• If the juice extractor SEEMS TOSTRUGGLE or slow down, turn theunit OFF and unplug. Thoroughlywash the cutter/strainer and separatoraccording to instructions. Reassembleand continue juicing.wWARNINGTo reduce risk of personal injury and/or damage to your juice extractor:• Never wash cutter/strainer or other removable parts in a dishwasher.• Always inspect cutter/strainer before each use.• Do not use a cracked, bent or damaged cutter/strainer.IMPORTANT INFORMATION: The cutter/strainer is a very delicate screensubject to wear, and therefore is not covered under warranty. Call our toll-freecustomer service number to order a new cutter/strainer.