For assistance or replacement parts, call our Technical Service number:866-285-1087 or 910-693-42778 a.m. – 5:00 p.m. EST Monday – Fridaywww.commercial.hamiltonbeach.comTechnical ServiceCut HazardAlways place lid on container whenblending.Do not put hands, spoons, or otherutensils in container when blending.Failure to follow these instructions canresult in broken bones, cuts, or otherinjuries.Burn HazardAlways use caution when blendinghot contents.Failure to follow these instructions canresult in burns.Sanitize using 1 tablespoon (15 ml) of householdbleach per 1 gallon (3.8 liter) of clean, cool water(60°F/16°C), mixed according to the instructionson the bleach.1. Fill container with sanitizing solution, replace lidand filler cap, and run on LOW speed for 2minutes. Empty container.2. Wipe exterior with soft cloth dampened withsanitizing solution.3. Immerse lid and filler cap in sanitizing solution for2 minutes.4. Place empty container on base and run on HIGHspeed for 2 seconds to remove any moisture fromthe cutter assembly.5. When ready to use, rinse with clean water.SanitizingElectrical Shock HazardDisconnect power beforecleaning blender base.Failure to follow theseinstructions can result indeath or electrical shock.Electrical Shock HazardPlug into a grounded outlet.Do not remove ground.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions canresult in death, fire, or electrical shock.3Replacement PartsPolycarbonate jar 6126-650Cutter assembly 98650Quiet Shield™ sound enclosure QS850Part Description Part NumberThe following components are subject to wear and should be replaced at leastyearly. We recommend keeping a replacement container and cutter on hand.Safety Alert SymbolsThe following safety alert symbols are used throughoutthis manual to alert you to the safety hazards describedbelow.