4800p 2D Imager User’s Guide 3 - 7Decode Search ModeThere are three selectable decode (scanning) modes:Full Omnidirectional - Searches for bar code features beginning at the centerof an image, and searches to the image’s limits. This mode reads allsymbologies (including OCR), in any orientation. The Full Omnidirectionalsearch is very thorough which may slow performance time.Note: This search mode is the default setting.Quick Omnidirectional - This is an abbreviated search for bar code featuresaround the center region of an image. This mode quickly reads all symbologiesin any orientation. The Quick Omnidirectional mode may miss some off-centersymbols, as well as larger Data Matrix and QR Code symbols.Advanced Linear Decoding - Performs quick horizontal linear scans in a centerband of the image. This mode isnot omnidirectional, but does quickly read linearand stacked bar codes. Advanced Linear Decoding cannot read 2D, OCR, orPostal symbols.Output Sequence OverviewRequire Output SequenceWhen turned off, the bar code data will be output to the host as the Imagerdecodes it. When turned on, all output data must conform to an edited sequenceor the imager will not transmit the output data to the host device.Note: This selection is unavailable when Print Weight (page 3-11) is enabled.*Full OmnidirectionalQuick OmnidirectionalAdvanced Linear Decoding
