• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.• Consult the dealer or an experienced radio or television technician for help.Caution: Any changes or modifications made to this equipment notexpressly approved by Hand Held Products, Inc. may void theFCC authorization to operate this equipment.Note: To maintain compliance with FCC Rules and Regulations, cablesconnected to this device must be Hand Held Products approved shieldedcables, in which the cable shield wire(s) have been grounded (tied) to theconnector shell. Installation of the included ferrite is required to meetemission requirements.Canadian NoticeThis equipment does not exceed the Class B limits for radio noise emissions asdescribed in the Radio Interference Regulations of the Canadian Department ofCommunications.Le present appareil numerique n’emet pas de bruits radioelectriques depassantles limites applicables aux appareils numeriques de la classe B prescrites dansle Reglement sur le brouillage radioelectrique edicte par le ministere desCommunications du Canada.Note: To maintain compliance with FCC Rules and Regulations, cablesconnected to this device must be shielded cables, in which the cableshield wire(s) have been grounded (tied) to the connector shell.Installation of the included ferrite is required to meet emissionrequirements.CE MarkThe CE mark on the product indicates that the system has beentested to and conforms with the provisions noted within the 2004/108/EC Electromagnetic Compatibility Directive and the 2006/95/EC LowVoltage Directive.Complies with:EN55022:2006 (for ITE emissions)EN55024:1998 (for ITE immunity)EN61000-3-2:2000EN61000-3-3:1995For further information please contact:Hand Held ProductsNijverheidsweg 9-135627 BT EindhovenThe Netherlands
