2 - 6 Dolphin® 9500 Series Mobile Computer User’s GuideUsing the Dolphin 9500 Series for the First Time1. Unpack the Carton and Verify its Contents2. Install the Main Battery Pack3. Charge the Main and Backup Batteries4. Initialize the Mobile Computer5. Align the Screen6. Complete the Opening Screens7. Set the Time Zone8. Let Autoinstall Run9. Verifying Operations with HHP DemosStep 1. Unpack the Carton and Verify its ContentsVerify that the carton contains the following items:• Dolphin 9500 Series mobile computer (the terminal)• Main battery pack (7.4v Li-ion)• Microsoft Companion CD• Dolphin 9500 Quick Start GuideBe sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service. For details,see Return Information on page 16-2.Each order includes a Dolphin Software Development Kit and User’s Guide CD; verify that you received this CD with your order.If you ordered accessories for your terminals, verify that they are also included with the order.The Dolphin 9500 Hand StrapThe Dolphin 9500 ships with the hand strap installed and fastened to the bottom panelwith a clip; see Bottom Panel Features on page 3-9. To install the battery pack, you mustdetach the hand strap.To detach the hand strap, push the hand strap clip down and away from the terminal.Move the strap up and away from the bottom panel.To re-attach the hand strap, slide the clip back into place on the bottom panel.The Dolphin 9501 has a special hand strap; see Hand Strap and Stylus on page 11-7.Step 2. Install the Main Battery PackUse only the Li-ion battery packs provided by HHP. The use of any batterypack not sold/manufactured by HHP in the Dolphin 9500/9550 terminal willvoid your warranty and may result in damage to the Dolphin terminal orbattery.1. Unpack the Li-ion battery pack. Hold the terminal with the front panel (keyboard)facing down.2. Take the battery and insert the end without the locking tab into the top of the batterywell and push down with a hinging motion until the locking tab snaps.To Remove the Main Battery PackPress the locking tab on the battery pack away from the bottom panel, and pull thebattery pack up with a hinging motion.ClipHand Strap!
