4 - 10 IT3800/3900 User’s GuideInterfunction DelayThis is a delay of up to 495 milliseconds (in multiples of 5) placed between thetransmission of each segment of the message string. You can program up to 99steps (of 5 ms each). Scan the Interfunction Delay bar code below, then scanthe number of steps, and the SAVE bar code from the inside back cover.Note: If you make an error while scanning thedigits (before scanning Save), scan Discard on the inside back cover,scan the Interfunction Delay bar code, scan the correct digits, and Saveagain.To remove this delay, scan the Interfunction Delay bar code, then set the numberof steps to 00. Scan the SAVE bar code from the inside back cover.Intermessage DelayThis is a delay of up to 495 milliseconds (in multiples of 5) placed between eachscan transmission. You can program up to 99 steps (of 5 ms each). Scan theIntermessage Delay bar code below, then scan the number of steps, and theSAVE bar code from the inside back cover.Note: If you make an error while scanning the digits (before scanning Save),scan Discard on the inside back cover, scan the Intermessage Delay barcode, scan the correct digits, and Save again.To remove this delay, scan the Intermessage Delay bar code, then set thenumber of steps to 00. Scan the SAVE bar code from the inside back cover.Interfunction DelaysPrefix Scanned Data Suffix1 2 3 4 5STX HT CR LFInterfunction Delay2nd Scan Transmission1st Scan TransmissionIntermessage DelayIntermessage Delay
