Handicare TROPHY Service Manual

Also see for Trophy: User manual Service manual Service manual

Contents

Handicare TROPHY Service Manual Manual pdf 68 page image

Trophy68 | Service instructions68 | Service instructions5.4.7 Upgrade instructions controllersMount the foot throttle for advanced electronics (ID-no > QT02400)Preparation• Switch off the scooter with the ignition key.• Disconnect the batteries.InstructionsBasic displayAdvanced displayNote! This procedure is intended for the Throphy with thelatest electronics. In case your Trophy has the dashboardas one above, you have the latest version electronics.Contact Handicare in case you have another dashboard(original electronics ID-no < QT02400).The following operations are required to mount the footthrottle:Note! Suitable work area required!Note! Remove always one finger-control! Replace it withcover steering wheel 9007423.Note! In case you have a basic display, a advanced displaywill be delivered with the foot throttle. Dismount the basicdisplay and mount the advanced display.• Loosen the floor mat from the frame.Note! For mounting the foot throttle on the floor mat youhave to drill two holes in the floor mat and frame. Besure you will not damage any cables mounted under theframe!• Determine the exact laying of the cables under theframe.• Reposition the cables in case they will be damagedwhile drilling the two holes.• Replace the floor mat and position the foot throttlemounting plate on the floor mat.• Drill the holes and mount the foot throttle mounting plate.• Mount the foot throttle on the mounting plate.• Guide the cable trough and under the frame, to theelectronics compartment on the backside of the scooter.• Remove the rear cover.• Connect the plug to the socket in the electronicscompartment and replace the rear cover.Relevant article numbers• 9007083 Foot throttle Advanced electronics• 1008730 4,8x19 self tapping screwTools used• Allen key, 3 mm• Metal drill, 6 mm• Drill• Screwdriver, crosshead1312Ø63X2110948-03-0213312