Hanil Smart 15 Plus Operation Manual
Also see for Smart 15 Plus: Operating manualQuick guideQuick guide
                        | |
Contents
| 
Technical Support : +82-3452-8966 / techsupport@ihanil.com 15/214. Operation1. Press the Setup/Enter button.2. Press the Left or Right button until the Accel/Decel display(0) flashes.▶ Accel rate setting mode: Accel display flashes(0).▶ Decel rate setting mode: Decel display flashes(0).3. Press the Setup/Enter button.4.4 Setting Acceleration/Deceleration[Start]1. Check all parameters are correct.2. Press the Start/Stop/Pulse button.[Stop]1. Press the Start/Stop/Pulse button to stop centrifugation.▶ The centrifugation stops when the set run time has been reached.4.5 Start/Stop a centrifugation |
Related manuals for Hanil Smart 15 Plus
Hanil Smart 15 Plus Operating Manual
Hanil Smart 13 Operation Manual
Hanil Smart R17 Operation Manual
Hanil M 13 Operation Manual
Hanil M15R Operation Manual
Hanil FLETA 4 Operation Manual
Hanil FLETA 40P Operation Manual
Hanil Component R12 Operation Manual
Hanil Micro 12 Operating Manual
Hanil J1250 Operating Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine