Hanna Instruments C 216 Instruction Manual

14GUIDE TO DISPLAY CODESNote: The secondary LCD below shows a generic "P– –", whereas themeter will indicate the exact program number (e.g. in C 216, "P1"for Alkalinity).Sampling in progress. This flashing promptappears each time the meter is performinga measurement.The microprocessor is adjusting the lightlevel, indicated by a scrolling "SIP".This indicates that the meter is in a zeroedstate and measurement can be performed.The blinking "LOBAT" indicates that thebattery voltage is getting low and thebatteries need to be replaced.The instrument is performing an internalcheck-up.This indicates that the meter is in a readystate and zeroing can be performed.This indicates that the batteries are deadand must be replaced.Light over range. The cuvet is not insertedcorrectly and an eccess ambient light isreaching the detector. If the cuvet is properlyinserted, then contact your dealer or thenearest Hanna Customer Service Center.