Hanna Instruments HI 96811 Instruction Manual

Also see for HI 96811: Instruction manual Instruction manual

Contents

11Note: The last measurement value will be displayed until the next sample is measured or theinstrument is turned off. Temperature will be continuously updated.Note: The ”ATC” tag blinks and automatic temperature compensation is disabled if thetemperature exceeds the 10-40 °C / 50-104 °F range.4. Remove sample from the sample well by absorbing on a soft tissue.5. Using a plastic pipette, rinse prism and sample well with distilled or deionized water. Wipedry. The instrument is ready for the next sample.TO CHANGE MEASUREMENT UNIT (HI 96813, HI 96814)TO CHANGE MEASUREMENT UNIT (HI 96813, HI 96814)TO CHANGE MEASUREMENT UNIT (HI 96813, HI 96814)TO CHANGE MEASUREMENT UNIT (HI 96813, HI 96814)TO CHANGE MEASUREMENT UNIT (HI 96813, HI 96814)For HI 96813 only:1. Press the RANGE key to select measurement units of %Brix or % potential alcohol. Theinstrument toggles between the two measurement scales each time the key is pressed andthe primary display indicates “bri” for %Brix or “P.ALc” for potential alcohol. When theinstrument displays the screen with 4 dashes, the instrument is ready for measurement. Anumber on the display indicates the selected unit: “1” denotes %Brix and “2” denotespotential alcohol as indicated on the instrument cover.2. The potential alcohol scale also indicates the conversion factor chosen for the potentialalcohol reading. See TO CHANGE POTENTIAL ALCOHOL CONVERSION FACTOR (page 13) tochange the current factor.Note: When changing ranges the presently configured conversion factor will be displayed in thelower display. (See page 13)QAQC LAB WHITE STONE VA 22578TEL (804) 318-3686