Hanna Instruments HI 9828 Instruction Manual

Also see for HI 9828: Instruction manual

Hanna Instruments HI 9828 Instruction Manual Manual pdf 61 page image

63APPENDIX C - WARRANTYAll HANNA instruments® meters are guaranteed for two years (sensors,meters are guaranteed for two years (sensors,meters are guaranteed for two years (sensors,meters are guaranteed for two years (sensors,meters are guaranteed for two years (sensors,electrodes and probes for six months)electrodes and probes for six months)electrodes and probes for six months)electrodes and probes for six months)electrodes and probes for six months) against defects in workmanship andmaterials when used for their intended purpose and maintained according toinstructions.This warranty is limited to repair or replacement free of charge. Damage due toaccident, misuse, tampering or lack of prescribed maintenance are not covered.If service is required, contact the dealer from whom you purchased the instru-ment. If under warranty, report the model number, date of purchase, serial num-ber and the nature of the failure.If the repair is not covered by the warranty, you will be notified of the chargesincurred.If the instrument is to be returned to HANNA instruments®, first obtain a Re-turned Goods Authorization number from the Customer Service department andthen send it with shipping costs prepaid.When shipping any instrument, make sure it is properly packaged for completeprotection.Recommendations for UsersBefore using this product, make sure that it is entirely suitable for the environment in which it is used.Operation of this instrument in residential areas could cause unacceptable interferences to radio and TVequipment, requiring the operator to take all necessary steps to correct interferences. The glass bulb at theend of the electrode is sensitive to electrostatic discharges. Avoid touching this glass bulb at all time. Tomaintain the EMC performance of equipment, the recommended cables noted in the user's manual mustbe used. Any variation introduced by the user to the supplied equipment may degrade the instruments' EMCperformance. To avoid electrical shock, do not use these instruments when voltage at the measurementsurface exceed 24 Vac or 60 Vdc. To avoid damage or burns, do not perform any measurement in microwaveovens.Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

/ 61

Related manuals for Hanna Instruments HI 9828