Hanns.G HL227 User Manual
                       | |
Contents
| 
User’s Manual21ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED:1. Check that the signal-cable is properly connected, If the connector is loose, tighten theconnector’s screws.2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT :Your computer has been set to unsuitable display mode, set the computer to display mode givenin the following table.FACTORY PRESET TIMING TABLE:MODE RESOLUTION HORIZONTALFREQUENCY (KHz)VERTICALFREQUENCY (Hz)1 640×400 @70Hz 31.469 70.0872 640×480 @60Hz 31.469 59.9403 640×480 @70Hz 36.052 70.0044 640×480 @67Hz 35.000 66.6675 640×480 @72Hz 37.861 72.8096 640×480 @75Hz 37.500 75.0007 720×400 @70Hz 31.469 70.0878 800×600 @56Hz 35.156 56.2509 800×600 @60Hz 37.879 60.31710 800×600 @72Hz 48.077 72.18811 800×600 @75Hz 46.875 75.00012 832×624 @75Hz 49.725 75.00013 1024×768 @60Hz 48.363 60.00414 1024×768 @70Hz 56.476 70.06915 1024×768 @75Hz 60.023 75.02916 1152×870 @75Hz 68.681 75.06217 1152×864 @75Hz 67.500 75.00018 1280×720 @60Hz 45.000 60.00019 1280×960 @60Hz 60.000 60.00020 1280×960 @75Hz 74.592 74.44321 1280×768 @60Hz 47.776 59.87022 1280×768 @75Hz 60.289 74.89323 1280×1024 @60Hz 63.981 60.02024 1280×1024 @75Hz 79.976 75.02525 1360×768 @60Hz 47.712 60.01526 1440×900 @60Hz 55.469 59.90127 1440×900 @75Hz 70.635 74.98428 1400×1050 @60Hz 64.744 59.948 |
Related manuals for Hanns.G HL227
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine