Hans Grohe AXOR Starck 10411009 Instructions For Use/assembly Instructions

Contents

installation instructions

Hans Grohe AXOR Starck 10411009 Instructions For Use/assembly Instructions Manual pdf 4 page image

Assembly see page 6Safety NotesGloves should be worn during installation to preventcrushing and cutting injuries.The shower system may only be used for bathing,hygienic and body cleansing purposes.The hot and cold supplies must be of equal pressu-res.Installation InstructionsThe fitting must be installed, flushed and tested afterthe valid norms.Hansgrohe mixers can be used together with hydrau-lically and thermically controlled continuous flowheaters if the flow pressure is at least 0,15 MPa.Technical DataOperating pressure: max. 1 MPaRecommended operating pressure: 0,1 – 0,5 MPaTest pressure: 1,6 MPa(1 MPa = 10 bar = 147 PSI)Hot water temperature: max. 80°CRecommended hot water temp.: 65°CCentre distance: 150 ±16mmConnections G 1/2: cold right - hot leftanti-pollution function••EnglishSpare parts (see page 11)Dimensions (see page 9)Do not use silicone containing acetic acid!Operation (see page 10)To adjust the hot water limiter on single levermixers, please see page 8. No adjustmentis necessary when using a continuous flowwater heater.Symbol descriptionFlow diagram(see page 9) tub showerCleaningCleaning recommendations, see enclosedbrochure.Maintenance (see page 12)The non return valves must be checkedregularly according to DIN EN 1717 inaccordance with national or regionalregulations (at least once a year).