Hans Grohe Ecostat 1001 SL 13241 Series Assembly Instructions Manual

Also see for Ecostat 1001 SL 13278000: Instructions for use/assembly instructions Assembly instructions Instructions for use/assembly instructions Instructions for use/assembly instructions

8Attention! The fitting must be installed, flushed andtested after the valid norms.Assembly1. Flush through the supply pipes.2. Mount the S - unions and align them.3. Fasten the mixer with the washers.Large differences in pressure between the hot andcold water supply should be balanced.AdjustmentCorrection is necessary if the temperature measuredat the take off point differs from the temperature seton the scale. To adjust please see page 25.Operation 1341XXXBy turning the handle on the left hand side thethermostatic mixer is opened, closed and the flowcan be changed from tub to shower function.The temperature is selected by turning the graduatedhandle on the right side.Operation 1361XXX/1366000/1378000The mixer is operated by turning the handle on theleft hand side. The green knob limits the rate of flowto approx. 10 l/min. If a higher water consumtionis required press the ECOSTOP button and turnhandle further.The temperature is selected by turning the graduatedhandle on the right side.Temperature limitationThe temperature is limited by the safety check to 38°C (100° F). If a higher temperature is required, it ispossible to override the safety stop by depressingthe safety button.To garantee a smooth running of the thermoelent, itis necessary from time to time to turn the thermostatfrom total hot to total cold.Attention!The mixer is equipped with non return valves.The non return valves must be checked regularly accor-ding to DIN EN 1717 in accordance with national orregional regulations (at least once a year)EnglishUsing the 1361XXX/1366000/1378000 in conjunction with combinationboilers.When using the Ecostat with combination boilers,the Ecostop ring 12 has to be removed (please seepage 26).If fitting a hand shower remove the water limiterfrom the shower.Using the 1341XXX in conjunction withcombination boilers.If fitting a hand shower remove the water limiterfrom the shower.If the continuous water heater causes any problems,or you have different water pressures you mustinstall a water limiter to the cold supply, (orderedseparately,article number 97510000).Technical DataOperating pressure: max. 1 MPaRecommended operating pressure: 0,1 - 0,5 MPaTest pressure: 1,6 MPaHot water temperature: max. 80° CRecommended hot water temp.: 65° CRate of flow by 0,3 MPa: 20 l/minTest certificate13241XXX/13261XXX/13278000: MCAWRASAnti-pollution functionSpare parts (see page 3)thermoelement 94282000shut off and diverter unit 96509000knob for thermoelement 96618XXXknob for shut off and diverter unit 96619XXXaerator cpl. 13485000non return valve 96737000noise reduction 96429000s-unions 94140000escutcheon 96467XXXsafety set for temperature control 95041000shut off unit 94149000safety set for flow control 95042000filter packing 96922000hose connection 98556000O-ring 20x1 98140000hexagon socket screw M5x25 976640001�2�3�4�5�6�7�8�9�10�11�12�13�14�15�16�