Hans Grohe Ecostat 1001 SL 13287000 Instructions For Use/assembly Instructions

Also see for Ecostat 1001 SL 13287000: Instructions for use/assembly instructions

Dimensions (see page 20)Operation (see page 19)Maintenance (see page 18)• To guarantee the smooth running of thethermostat, it is necessary from time totime to turn the thermostat from total hotto total cold.• The mixer is equipped with non returnvalves. The non return valves must bechecked regularly according to DIN EN1717 in accordance with national or re-gional regulations (at least once a year).Adjustment (see page 16)After the installation, the output tempera-ture of the thermostat must be checked. Acorrection is necessary if the temperaturemeasured at the output differs from thetemperature set on the thermostat.Safety Function (see page 17)The desired maximum temperature for exam-ple max. 42º C can be pre-set thanks to thesafety function.Do not use silicone containing acetic acid!Symbol description6 Safety Notes6 Gloves should be worn during installation to preventcrushing and cutting injuries.6 The shower system may only be used for bathing,hygienic and body cleansing purposes.6 Children as well as adults with physical, mental and/or sensoric impairments must not use this showersystem without proper supervision. Persons underthe influence of alcohol or drugs are prohibited fromusing this shower system.6 The hot and cold supplies must be of equal pres-sures.Installation Instructions• Prior to installation, inspect the product for transportdamages. After it has been installed, no transport orsurface damage will be honoured.• The product is not designed to be used with steambaths!• The fitting must be installed, flushed and tested afterthe valid norms!Thermostatic mixer in conjunction withcombination boilers• If fitting a hand shower remove the water limiter fromthe shower.• In case of problems with the continuous water heateror of greatly varying water pressures, you must installthe water limiter (comprised in the delivery, articlenumber 97510000) in the cold water supply.Technical DataOperating pressure: max. 1 MPaRecommended operating pressure: 0,1 – 0,5MPaTest pressure: 1,6MPa(1 MPa = 10 bar = 147 PSI)Hot water temperature: max. 80°CRecommended hot water temp.: 65°CThermal disinfection: max. 70°C / max. 4 min• anti-pollution function• The product is exclusively designed for drinking water!English4