Hans Grohe Ecostat 5001 15340 Series Manual

9EnglishSpare parts1 thermoelement 942820002 shut off unit with selector 965090003 knob for thermoelement 96516XXX4 knob for shut off unit 96517XXX5 mousseur cpl. 134850006 non return valve DW 16 950330007 filter 950390008 ball s-unions 139890009 Elastop shut off unit 9414900010 knob for shut off unit 96518XXX11 safety set for temperature control 9647000012 safety set for flow control 9643000013 escutcheon 96428XXXXXX = Colors000 chrome090 chrome/gold450 whiteFault Cause RemedyInsufficient water - Supply pressure inadequate- Filter are dirty- Shower filter seal dirty- Check mains pressure- Cleaning the filter in the waterconnection and at the thermostatcartridge- Clean filter seal between showerand hoseCrossflow, hot water being forcedinto cold water pipe, or viceversa, when mixer is closed- Backflow preventers dirty orleaking- Clean backflow preventers,exchange if necessarySpout temperature does notcorrespond with temperature set- Thermostat has not beenadjusted- Hot water temperature too low- Adjust thermostat- Increase hot water temperatureto 42 °C to 65 °CTemperature regulation notpossible- MTC-thermo cartridge calcified - Exchange MTC-thermo cartridgeShower or spout dripping - Dirt or sedimentation on valveseat, shut-off unit damaged- Clean or exchange shut-off unitInstantaneous heater didn’t workwith thermostat- Ecostop ring isn’t removedFlow limiter in handshower isn’tremoved- Flow limiter in handshower isn’tremoved- Filter are dirty- Non return ralve didn’t moveback- Remove ecostop ring (12)- Remove flow limiter- Clean the filter / exchange filter- Exchange non return valves