Hans Grohe Ecostat Select 13141 Series Instructions For Use/assembly Instructions

Also see for Ecostat Select 13141 Series: Instructions for use/assembly instructions Instructions for use/assembly instructions

Contents

installation requirements

41KEYIsolating valveReducing valveMixer ValvePumpGas Combination Boiler (multi-point)Unvented System (pressure balanced)Pumped SystemInstallation RequirementsThis thermostatic mixer valve must be installed in compliance with current Water Regu-lations. If you have any doubts about the Water Regulation requirements contact yourlocal water services provider or use the services of a professional plumber.This mixer valve is suitable for use with the following water supply systems:Gas Combination Boiler (multi-point) 1.0 - 10 bar*Unvented System (pressure balanced) 1.0 - 10 barPumped System 1.0 - 10 barIMPORTANT: If you install this mixer with a gravity fed system, there must be aminimum head (vertical distance) from the underside of tlie cold water storage tankto the showerhead position of at least 5 metre.Before connecting the mixer, water should be flushed through the system to removeall debris that might otherwise damage the valve.* If pressure is in excess of 3.5 bar, a pressure-reducing valve should be fitted.Requirement for valve accessibility to maintain and commission the valve.Supply Conditions TMV2Operating pressure range High pressure Low pressureMaximum static pressure - bar 10 10Flow pressure, hot and cold - bar 1 to 5 0.2 to 1Hot supply temperature - °C 52 to 65 52 to 65Cold supply temperature - °C 5 to 20 5 to 20Supply Conditions TMV3Operating pressure range High pressure Low pressureMaximum static pressure - bar 10 10Flow pressure, hot and cold - bar 0.5 to 5 0.1 to 1Hot supply temperature - °C 55 to 65 55 to 65Cold supply temperature - °C 5 to 25 5 to 25Valves operating outside these conditions of use cannot be guaranteed to operateas Type 2 valve.

/ 44

Related manuals for Hans Grohe Ecostat Select 13141 Series