Hans Grohe Logis 110 Fine 71251 Series Instructions For Use/assembly Instructions

Also see for Logis 110 Fine 71201 Series: Instructions for use/assembly instructions

4EnglishAssembly (see page 33)Safety NotesGloves should be worn during installation to preventcrushing and cutting injuries.The product may only be used for bathing, hygienicand body cleaning purposes.The hot and cold supplies must be of equal pressures.Installation Instructions• Prior to installation, inspect the product for transportdamages. After it has been installed, no transport orsurface damage will be honoured.• The pipes and the fixture must be installed, flushedand tested as per the applicable standards.• The plumbing codes applicable in the respectivecountries must be observed.• The drain valve must only be used as intended. It isnot allowed to attach other objects to the drain valve,for example a semi-pedestal.• If the instantaneous water heater causes problems orif you wish to increase the water flow, the EcoSmart(flow limiter) located behind the aerator can beremoved.• If the water is flowing along the fixture in the directionof the shaft, the spray former must be replaced with astandard air bubbler 13185XXX.Technical DataThis mixer series-produced with EcoSmart (flow limiter)Operating pressure: max. 1 MPaRecommended operating pressure: 0,1 - 0,5 MPaTest pressure: 1,6 MPa(1 MPa = 10 bar = 147 PSI)Hot water temperature: max. 60°CThermal disinfection: 70°C / 4 minThe product is exclusively designed for drinking water!Symbol descriptionDo not use silicone containing acetic acid!Adjustment (see page 35)To adjust the hot water limiter. Using a hot water limiter incombination with a continuous flow water heater is notrecommended.Dimensions (see page 37)Flow diagram (see page 37)Spare parts (see page )XXX = Colors000 = Chrome Plated670 = Matt Black700 = Matt WhiteSpecial accessories (order as an extra)• special tool #58085000 (see page 33)• Installation putty (see page 33)Cleaning (see page 40)Operation (see page 38)• Hansgrohe recommends not to use as drinking waterthe first half liter of water drawn in the morning orafter a prolonged period of non-use.• After periods of prolonged non-use, but at least everythird day, the fittings must be opened with the handlein hot and cold position to prevent stagnation in theconnecting lines. Let the water run until the watertemperature is constant.Test certificate (see page 38)