Hans Grohe Logis 70 Instructions For Use/assembly Instructions

Also see for 71103000: Instructions for use/assembly instructions Instructions for use/assembly instructions

Contents

installation instructions

Safety NotesGloves should be worn during installation to preventcrushing and cutting injuries.The shower system may only be used for bathing,hygienic and body cleaning purposes.The hot and cold supplies must be of equal pres-sures.Installation Instructions• Prior to installation, inspect the product for transportdamages. After it has been installed, no transport orsurface damage will be honoured.• The pipes and the fixture must be installed, flushedand tested as per the applicable standards.• The plumbing codes applicable in the respectivecountries must be oberserved.• The drain valve must only be used as intended. It is notallowed to attach other objects to the drain valve, forexample a semi-pedestal.• If the instantaneous water heater causes problems orif you wish to increase the water flow, the EcoSmart®(flow limiter) located behind the aerator can beremoved.Technical DataThis mixer series-produced with EcoSmart® (flowlimiter)Operating pressure: max. 1 MPaRecommended operating pressure: 0,1 - 0,5 MPaTest pressure: 1,6 MPa(1 MPa = 10 bar = 147 PSI)Hot water temperature: max. 70°CRecommended hot water temp.: 65°CThermal disinfection: max. 70°C / 4 minThe product is exclusively designed for drinking water!EnglishCleaning(see page 40)seal #98996000(see page 31)Operation (see page 37)• Hansgrohe recommends not to use asdrinking water the first half liter of waterdrawn in the morning or after a pro-longed period of non-use.• After periods of prolonged non-use, butat least every third day, the fittings mustbe opened with the handle in hot andcold position to prevent stagnation in theconnecting lines. Let the water run until thewater temperature is constant.Assembly see page 31Dimensions(see page 35)Adjustment (see page 34)To adjust the hot water limiter. Using a hotwater limiter in combination with a continu-ous flow water heater is not recommended.Spare parts(see page 38)special tool #58085000(see page 32)Do not use silicone containing acetic acid!Symbol descriptionFlow diagram(see page 36)Installation putty(see page 32)Special accessories (order as anextra)4Test certificate(see page 44)