Hans Grohe Metris S 31160000 Instructions For Use/assembly Instructions

Also see for Focus S 37121000: Instructions for use and assembly Instructions for use/assembly instructions Instructions for use/assembly instructions

Contents

installation instructions

Hans Grohe Metris S 31160000 Instructions For Use/assembly Instructions Manual pdf 4 page image

Assembly see page 31Test certificate (see page 44)Special accessories (order as anextra)seal #98996000Spare parts (see page 39)Cleaningand enclosed brochureOperation (see page 35)• Due to the design of the Bidette fittings,a small amount of water will leak at theoutlet of the fitting when the hand showeris running.• Hansgrohe recommends not to use asdrinking water the first half liter of waterdrawn in the morning or after a pro-longed period of non-use.Flow diagram(see page 38)c Rate of flow mixerd Rate of flow handshowerDimensions (see page 36)Adjustment (see page 34)To adjust the hot water limiter on single levermixers, please see page 34. Using a hotwater limiter in connection with a continuousflow water heater is not recommended.Do not use silicone containing acetic acid!Symbol descriptionSafety NotesGloves should be worn during installation to preventcrushing and cutting injuries.The shower system may only be used for bathing,hygienic and body cleansing purposes.The hot and cold supplies must be of equal pres-sures.Installation Instructions• Prior to installation, inspect the product for transportdamages. After it has been installed, no transport orsurface damage will be honoured.• The fitting must be installed, flushed and tested afterthe valid norms!• The plumbing codes applicable in the respectivecountries must be oberserved.• The plumbing codes applicable in the respectivecountries must be oberserved.• The mixer can not used together with a continuousflow water heater.Technical DataOperating pressure: max. 1 MPaRecommended operating pressure: 0,1 - 0,5 MPaTest pressure: 1,6 MPa(1 MPa = 10 bar = 147 PSI)Hot water temperature: max.80°CRecommended hot water temp.: 65°CThermal disinfection: max. 70°C / 4 minSafety against backflowThe product is exclusively designed for drinking water!English4