Hans Grohe Metris S Instructions For Use/assembly Instructions

Also see for Metris: Instructions for use/assembly instructions Manual Instructions for use/assembly instructions Instructions for use and assembly instructions Instructions for use/assembly instructions

Contents

installation instructions

Hans Grohe Metris S Instructions For Use/assembly Instructions Manual pdf 3 page image

3+Assembly (see page 4)Safety NotesGloves should be worn during installation to preventcrushing and cutting injuries.The product may only be used for bathing, hygienicand body cleaning purposes.The hot and cold supplies must be of equal pres-sures.Installation Instructions• Prior to installation, inspect the product for transportdamages. After it has been installed, no transport orsurface damage will be honoured.• The pipes and the fixture must be installed, flushedand tested as per the applicable standards.• The plumbing codes applicable in the respectivecountries must be observed.Technical DataOperating pressure: max. 1 MPaRecommended operating pressure: 0,1 - 0,5 MPaTest pressure: 1,6 MPa(1 MPa = 10 bar = 147 PSI)Hot water temperature: max. 70°CRecommended hot water temp.: 65°CThermal disinfection: max. 70°C / 4 minThe product is exclusively designed for drinking water!EnglishCleaning(see page 9)Symbol descriptionFault Cause RemedyMixer stiff - Cartridge defective, calcified - Exchange cartridgeMixer dripping - Cartridge defective - Exchange cartridgeHot water temperature too low, nocold water. Instantaneous waterheater starts up when cold water isselected.- Hot water limiter incorrectly set - Set hot water limiter- Crossflow - Exchange cartridgeDiverter not operating - Residue - Clean converter / grease O-rings- Water pressure to low - Increase water pressure- Diverter defective - Exchange diverterDo not use silicone containing acetic acid!Adjustment (see page 6)To adjust the hot water limiter. Using a hotwater limiter in combination with a continu-ous flow water heater is not recommended.Operation(see page 7)Dimensions(see page 8)Flow diagram(see page 9)free flow: Shower outlet Tub outletSpare parts (see page 15)XX = Colors00 = chrome plated40 = white/chrome platedSpecial accessories (see page 14)order as an extra• Extension Set 22 mm (when wall is notdeep enough).• extension 25 mm