Hans Grohe Metris S Series Instructions For Use/assembly Instructions

Also see for Metris S 31160000: Installation instructions Instructions for use and assembly Instructions for use/assembly instructions Instructions for use/assembly instructions Instructions for use and assembly instructions

Contents

installation instructions

Hans Grohe Metris S Series Instructions For Use/assembly Instructions Manual pdf 4 page image

4EnglishAssembly (see page 31)Safety NotesGloves should be worn during installation to preventcrushing and cutting injuries.The product may only be used for bathing, hygienicand body cleaning purposes.The hot and cold supplies must be of equalpressures.Installation Instructions• Prior to installation, inspect the product for transportdamages. After it has been installed, no transport orsurface damage will be honoured.• The pipes and the fixture must be installed, flushedand tested as per the applicable standards.• The plumbing codes applicable in the respectivecountries must be observed.• The mixer can not used together with a continuousflow water heater.• 31285000 / 31927000 / 32522000 /74522000: The drain valve must only be used asintended. It is not allowed to attach other objects tothe drain valve, for example a semi-pedestal.Technical DataOperating pressure: max. 1 MPaRecommended operating pressure: 0,1 - 0,5 MPaTest pressure: 1,6 MPa(1 MPa = 10 bar = 147 PSI)Hot water temperature: max. 70°CRecommended hot water temp.: 65°CThermal disinfection: max. 70°C / 4 minThe product is exclusively designed for drinking water!Symbol descriptionDo not use silicone containing acetic acid!Adjustment (see page 34)To adjust the hot water limiter. Using a hot water limiterin combination with a continuous flow water heater isnot recommended.Dimensions (see page 36)Flow diagram (see page 38) Rate of flow mixer Rate of flow Hand showerCleaning (see page 39)Spare parts (see page 40)Special accessories(order as an extra)• seal #98996000 (see page 32)Operation (see page 35)• Hansgrohe recommends not to use as drinking waterthe first half liter of water drawn in the morning orafter a prolonged period of non-use.• Due to the design of the Bidette fittings, a smallamount of water will leak at the outlet of the fittingwhen the hand shower is running.Test certificate (see page 48)