Hans Grohe Raindance Rainfall 28433 Series Instructions For Use/assembly Instructions

Also see for Raindance Rainfal 28433 Series: Installation/User Instructions/Warranty Instructions for use/assembly instructions

4Rainddcecfel2Du2tshfMonfMgcnfMEnglishAssembly see page 46Safety Notes6 Gloves should be worn during installation to prevent crushing andcutting injuries.6 The arm of the shower head is intended only to hold the shower head.Do not load it down with other objects!6 Children as well as adults with physical, mental and/or sensoric im-pairments must not use this shower system without proper supervision.Persons under the influence of alcohol or drugs are prohibited fromusing this shower system.6 Do not allow the streams of the shower touch sensitive body parts (suchas your eyes). An adequate distance must be kept between the showerand you.6 The shower system may only be used for bathing, hygienic and bodycleansing purposes.6 The hot and cold supplies must be of equal pressures.Installation Instructions• The pipes and the fixture must be installed, flushed and tested as per theapplicable standards.• Prior to installation, inspect the product for transport damages. After ithas been installed, no transport or surface damage will be honoured.• During installation of the product by qualified trained personnel, makesure that the entire fastening surface is even and smooth (no protrudingseams or tile offset), that the finish of the wall is suitable to apply theproduct and has no weak points.• The mesh washers must be installed to protect against incoming dirt bypipework. Incoming dirt can impair the function and/or lead to damageson functional parts of the fixture; Hansgrohe will not be held liable forresulting damages.• This mixer cannot be used in conjunction with hydraulically, electronicallyor thermally controlled instantaneous heaters.Technical DataOperating pressure: max. 0,6 MPaRecommended operating pressure: 0,2 – 0,4 MPa(1 MPa = 10 bar = 147 PSI)Hot water temperature: max. 60°CRecommended hot water temp.: 42°CThermal disinfection: max. 70°C / 4 minSymbol descriptionDo not use silicone containing acetic acid!Cleaning (see page 49)Test certificate (see page 52)Dimensions (see page 31)Flow diagram (see page 32 - 45)Spare parts (see page 52)Installation example (see page 32 - 45)Center shower tubWarm waterCold waterThe wall must be reinforced in this area.Shut off valveQuattro 4-Way Diverter ValveTrio 2-Way Diverter Valve with integrated Shut-offvalvePlug the unused outlet.Safety gloves must be wornEye protection must be wornnatural spongeDecalcifier (Citric acid base)Avoid contact with eyes and skin. If this productcontacts your eyes, rinse thorougly with water.The waste drain performance must be more than50 l/min.Waste