11CLOSEMOUNT INSTRUCTIONSHelpful Hint: The downrod (A), canopy cover (F) andyoke cover (K) are not used in this type of installation.1. Remove the canopy cover (F) from the bottom of thecanopy (E).2. Remove three Phillips-head closemount screws (Q)from the top of the motor assembly (I). Align the canopy(E) with the holes in the top of the motor assembly (I),then re-install the Phillips-head closemount screws(Q) to secure the canopy (E) to the top of the motorassembly (I).3. Raise the fan and place the canopy (E) on the hook onthe mounting bracket (D), temporarily leaving hands freefor the wiring process.123HookEFQEIED