Harbor Breeze C-TMH44CH5D1R Manual
                | |
9WIRINGWrap electrical tape (not included) around eachindividual wire connector (CC) down to the wire.WARNING: Make sure no bare wire or wirestrands are visible after making connections. PlaceBARE/GREEN and WHITE connections onopposite side of box from the BLACK and BLUE (ifapplicable) connections.2.2.CC2CCCCHardware UsedWire Connector x 6CCFINAL INSTALLATION1. Remove motor housing (C) from J-hook. Liftmotor housing (C) to mounting plate (A). Alignslotted holes on top rim of motor housing (C) withloosened mounting plate screws (K) in mountingplate (A). Twist motor housing (C) to lock.Re-insert the two mounting plate screws (K)previously removed (Step 3, page 6) and thentighten all four mounting plate screws (K) tosecure motor housing (C).1 AKKC3Place remote control receiver (L) inside top of motorhousing (C). Turn spliced/taped wires upward andcarefully arrange wires and wire connectors (CC)within top of motor housing (C).NOTE: The remote control included with this fanmeets the following requirements:a. Not for use with solid state fans.b. Electrical rating: 120V / 60 Hz;motor amps:1.5 MAX.;light watts: 16LED 300VAShould you choose to use a different remote controlwith this fan, it must also meet these samerequirements.3.LAntennaCCCJ-hookSlottedHole |
Related manuals for Harbor Breeze C-TMH44CH5D1R
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine