Harbor Breeze Casual-3-2011 Manual

Contents

Harbor Breeze Casual-3-2011 Manual Manual pdf 11 page image

DDDDDDBAKBB HGCCH11WIRING2. Wrap electrical tape around each individual wireconnector (DD) down to the wire as shown in Fig. 3.WARNING: Make sure no bare wire or wire strandsare visible after making connections. Place green andwhite connections on opposite side of box from the blackand blue (if applicable) connections.Turn spliced/taped wires upward and gently push wiresand wire connector (DD) into outlet box.2FINAL INSTALLATION1. Tuck connections neatly into ceiling outlet box. Removeone screw from the mounting bracket (C) and loosen theother screw around 1/4 in.Align the canopy (B) up to ceiling and over the loosescrew. Place the canopy (B) into key hole and rotateclockwise.Secure the canopy (B) with previously removed screw.Place the canopy cover (K) over the canopy (B) androtate clockwise until it is locked into right position.[Fig. 1]12. Partially insert three blade screws (BB), along withthree blade washers (CC) to attach one blade arm (G)to a blade (H). Then, tighten each blade screw (BB)starting with the one in the middle. [Fig. 2] Repeat withremaining blades (H).2BBCCBlade Screw x 15Blade Washers x 15Hardware Used