6Check to make sure blades (G) will be at least30 inches from any obstruction. Check downrod(A) length to ensure blades (G) will be at least 7 ft.above the floor.3.INITIAL INSTALLATION2. Determine mounting method to use.A. Standard mountB. Angle mountNote: Flushmount and closemount options are notavailable for this fan.IMPORTANT: If using the angle mount, ensure theceiling angle is not steeper than 19°.*Helpful Hint: Downrod-style mounting is bestsuited for ceilings 8 ft. high or higher. For tallerceilings you may want to use a longer downrod(not included). Angle-style mounting is best suitedfor angled or vaulted ceilings. A longer downrod issometimes necessary to ensure proper bladeclearance.2BA7 ft.min.30 in.min.3G19° max.Turn off circuit breakers or fuse and wall switch tothe fan supply line leads.DANGER: Failure to disconnect power supplyprior to installation may result in serious injury ordeath.1.ONOFFONOFF1