Harbor Freight Tools 03516 Assembly And Operating Instructions Manual

Contents

Harbor Freight Tools 03516 Assembly And Operating Instructions Manual Manual pdf 10 page image

5. Plug the 12 Volt DC Adapter Transformer (part #14) into a grounded, 3-Hole, 120Volt electric outlet. (See Figure A.)6. Follow the directions in Step #1 to fully charge the Batteries (part #11).7. When the charging process is completed, disconnect the 12 Volt DC AdapterTransformer (part #14) from the grounded, 3-Hole, 120 Volt electric outlet.(See Figure A.)8. Disconnect the 12 Volt DC Adapter Transformer Output Line (part #14) from theBattery Electric Supply Line (part #12). (See Figure F.)9. Plug the Battery Electric Supply Line (part #12) back into the Wiring Harness(part #13). (See Figure F.)10. Re-install the Seat (part #15) on the ATV. (See Figure C.)ADAPTERTRANSFORMEROUTPUT LINE(#14)WIRINGHARNESS(#13)BATTERY ELECTRIC SUPPLY LINE (#12)BATTERIES (#11)FIGURE FOPERATING INSTRUCTIONS1. Once seated on the ATV, select the desired speed (Low or High) and direction(Forward or Reverse) on the Instrument Panel (part #18). (See Figure C.)2. Insert the Ignition Key (part #22) into the Ignition Switch, and turn the Ignition Keycounterclockwise to turn on the ATV. (See Figure C.)3. Then, step on the Throttle Pedal (part #19) to move the ATV at the pre-selectedspeed and in the pre-selected direction.SKU 03516 PAGE 10

/ 12

Related manuals for Harbor Freight Tools 03516