Harbor Freight Tools Central Machinery 61487 Owner's Manual And Safety Instructions

Contents

Harbor Freight Tools Central Machinery 61487 Owner's Manual And Safety Instructions Manual pdf 15 page image

Page 15For technical questions, please call 1-800-444-3353.Item 61487SAFETyOpERATIONMAINTENANcE SETUpMaintenance and Servicingprocedures not specifically explained in this manual mustbe performed only by a qualified technician.TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:Turn the power Switch of the tool off and unplug the tool from its electricaloutlet before performing any procedure in this section.TO pREVENT SERIOUS INJURy FROM TOOL FAILURE:Do not use damaged equipment. If abnormal noise or vibrationoccurs, have the problem corrected before further use.cleaning, Maintenance, and Lubrication1. BEFORE EAcH USE, inspect the generalcondition of the tool. Check for:• loose hardware,• misalignment or binding of moving parts,• cracked or broken parts,• damaged electrical wiring, and• any other condition that mayaffect its safe operation.2. AFTER USE, wipe external surfacesof the tool with clean cloth.3. Using compressed air, blow clean the Table, Base,and Motor cooling vents of dirt and materials.4. Apply paste wax to the Table and Tube Column toenable movement and to help keep surfaces clean.5. All bearings are factory lubricatedand need no further attention.6. Periodically, lubricate the Rack teeth,Table gears, and Spindle upper teeth.7. WARNING! If the supply cord of thispower tool is damaged, it must be replacedonly by a qualified service technician.Belt Inspection and Tensioning1. Examine belt for cracks, tears inthe backing, and other damage.2. Replace belt if damaged, following the instructionsunder Installing the Belts on page 9.