3 - Description3.5SetBox controls for sprayers equipped with ISOBUSThe SetBox controls secondary functions. The keys are grouped into control areas to simplify operator understanding.÷ Note: Self-propelled sprayers do not have a SetBox as the controls are built-in to the cabin.1. Power ON/OFF.2. Status diode.3. Left boom fold.4. Left boom unfold.5. Right boom fold.6. Right boom unfold.7. 2nd outer section fold (Dual Fold booms only).8. 2nd outer section unfold (Dual Fold booms only). ATTENTION! The Grip cannot be switched ON/OFF separately. It is automatically switched ON when tractor power isturned ON (ISOBUS).HZ Hydraulic controls on the Grip handle (ISOBUS & PRESIDIO)A. Status LED.B. Boom section controls.C. Main ON/OFF.D. Tilt.E. Boom height.F. Boom slant.G. Not used.HZ Hydraulic controls on the HARDI® spray center (PRESIDIO)The boom controls on the HARDI® spray center work in combination with the Grip controls. The buttons on the consolecontrol the following functions:1. Status LED.2. Main ON/OFF.3. Unfold/Fold boom.4. Unfold/Fold second outer section (90’/60’ booms only).5. Left End Nozzle ON/OFF (optional).6. Right End Nozzle ON/OFF (optional).7. Foam Marker Left/Right.8. Foam Marker blob interval.9. Foam Marker Inner/Outer (optional).BADFEEDCGF3 4215 6 7 8 9
