3Operator safetyWatch for this symbol . It means WARNING, CAUTION, NOTE.Your safety is involved so be alert!Note the following recommended precautions and safe operatingpractices.Read and understand the instruction book before using the equip-ment. It is equally important that other operators of this equipmentread and understand the book.Local law may demand that the operator be certified to use sprayequipment. Adhere to the law.Pressure test with clean water prior to filling with chemicals.Wear protective clothing.Rinse and wash equipment after use and before servicing.Depressurize equipment after use and before servicing.Never service or repair the equipment whilst it is operating.Disconnect electrical power before servicing.Always replace all safety devices or shields immediately afterservicing.If an arc welder is used on the equipment or anything connectedto the equipment, disconnect power leads before welding. Re-move all inflammable or explosive material from the area.Do not eat, drink or smoke whilst spraying or working with con-taminated equipment.Wash and change clothes after spraying.Wash tools if they have become contaminated.In case of poisoning, seek doctor or ambulance. Remember toidentify chemicals used.Keep children away from the equipment.Do not attempt to enter the tank.If any portion of the instruction book remains unclear after readingit, contact your HARDI dealer for further explanation before usingthe equipment.