Harken R32 User Manual
Also see for R32: Instructions
                                | |
Contents
| 
Access Rail System – R321b Standards - Access Rail systems are CE certified and independently tested under EN795.2012 Type B/D, meetANSI Z359 and are OSHA compliant. See full list of standards in the appendix.1c LimitationsCapacity - In normal use, no more than one person may be connected to a two-trolley assembly at one time.Typically, the combined load (including clothing, tools, etc) must not exceed 140 kg (310 lb). The Access Railsystem has been tested and certified to CEN/TS 16415:2013 and proven capable of supporting up to four usersper three (3) meter rail segment with fasteners at 300 mm (11.8") centers.Test reports - Test reports available from Harken upon request.Free fall - Personal fall-arrest systems used with this equipment must be rigged to limit the free fall to no morethan 1.8 m (6').Suspension - Personal suspension system must be rigged so that no vertical free fall is possible.Maximum2 m (6.5')INCORRECTCORRECTFall arrest clearance - There must be sufficientclearance below the user to arrest a fall before the userstrikes the ground or other obstruction. Height of user,plus extended safety lanyard length, must not be morethan the height from rail to ground minus 2 m (6.5').15°1e Training - The user must have appropriate training in order to use this product. It is the responsibility of thepurchaser, installer, and user of this equipment to assure that they are familiar with these instructions, trained inthe correct care and use of the equipment, and are aware of the operating characteristics, application limits, andthe consequences of improper use of the equipment. Rope access operators using this equipment must be trainedto a least Irata level 1 or SPRAT level 1 equivalent.1d Load angle limitations - Rail must be installed between 0° and 5°of horizontal. See below. Rail can be mounted at various angles onthe horizontal mounting structure. Harken IN10448, IN150, and IN151trolleys have the ability to handle loading at an angle up to 15° beyondvertical. Loads beyond 15° from vertical will overload trolley. Seeimage at right.1 - APPLICATIONS (Continued)5°Maximum to horizontal |
Related manuals for Harken R32
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine