I N S T R U C T I O N STi-Lite Carbo AirBlock®351 (29mm), 2651 (40mm), 2607 (57mm)1251 E. Wisconsin Avenue • Pewaukee, WI 53072 USATel: 262-691-3320, Fax: 262-691-3008Web: www.harken.com, Email: harken@harken.comA2 Repeat A1 two times.See: E Finish—Dead-EndLine.A1A2A1 Pass line throughmouth, through head,around bail, throughhead and through mouthin oppositedirection.B1 Pass line throughmouth, through head,around bail so linecrosses. Go throughhead and throughmouth in oppositedirection.B1B2B Tie to Bail/Eyestrap—PerpendicularB2 Repeat B1 twotimes, crossing line eachtime.See: C Tie to Boom.for completeinstructions.See: E Finish—Dead-EndLine.A Tie to Bail/Eyestrap—ParallelWARNING!: Use three loops of the line supplied.Using fewer loops will weaken the block causing it tobreak suddenly causing an accident, damage to yourvessel, personal injury or death. See www.harken.com for additional safety information.Inspect Line Every Time You SailInspect line for chafe or UV-damage every time you sail. Replacedamaged line immediately. Replace line with no visible damage afterno more than two-years use. Consult Chart B (left) for replacementline or use block breaking strength, Chart A (left) to select thecorrect line.Tie to Mouth of BlockUse Three (3) Loops of Supplied LineTie Only to Objects with Rounded EdgesPartNo. ReorderPart No.Line Ø Line Typein mm351 HCP1438 1/16 2 Maxibraid2651 HCP1419 3/32 2.5 Maxibraid2607 HCP392 1/8 3 MaxibraidChart B—Line Replacement*Includes 4' (1.2m) linePartNo. Size(mm)Maximum Working Load (MWL) Breaking Load (BL)lb kg lb kg351* 29 330 150 1000 4542651* 40 485 220 1200 5442607* 57 792 360 2380 1080Chart A—Block Specifications3 LOOPShEADMOUThCORRECT INCORRECTCORRECT INCORRECTStrictly follow all instructions to avoid an accident,damage to your vessel, personal injury or death. Seewww.harken.com for additional safety information.WARNING!: Attach only to objects with rounded edges.Do not tie block to stamped eyestrap. This will causeline to chafe and break suddenly causing an accident,damage to your vessel, personal injury or death. Seewww.harken.com for additional safety information.WARNING!: Tie only to the mouth of the block asshown. Do not tie to head of block. This will causethe block to break suddenly causing an accident,damage to your vessel, personal injury or death. Seewww.harken.com for additional safety information.WARNING!: Failure to inspect and replace UV-dam-aged, worn or frayed line can cause the line to breaksuddenly causing an accident, damage to your vessel,personal injury or death. See www.harken.com foradditional safety information.Rounded Sharp