2 TABLE OF CONTENTS3 Introduction4 Safety Information4 Unpacking5 Front Panel Controls7 Rear Panel Connections9 Main Remote Control Functions13 Installation and Connections13 Audio Connections13 Video Connections14 HDMI Connections14 SCART A/V Connections15 Power Connections16 Speaker Selection16 Speaker Placement17 System Configuration17 First Turn On17 Using the On-Screen Display17 System Setup18 Input Setup19 Surround Setup20 Night Mode Settings20 Configuring the Surround Off(Stereo) Modes21 Automated Speaker Setup Using EzSet/EQ23 Manual Setup23 Speaker Setup26 Delay Settings27 Output Level Adjustment30 Operation30 Surround Mode Chart32 Basic Operation32 Source Selection32 6-Channel Direct Input32 Controls and Use of Headphones33 Surround Mode Selection33 Digital Audio Playback33 Dolby Digital33 DTS34 PCM Audio Playback34 Selecting a Digital Source34 Digital Bitstream Indicators34 Surround mode Types35 Surround Mode Post Processing35 PCM Playback Indications35 Speaker/Channel Indicators36 Night Mode37 Tape Recording37 Using The Bridge38 Output Level AdjustmentWith Source Signals38 Dim function38 Memory backup39 System Setup39 Front Panel Display Fade39 Turn-On Volume Level39 Semi-OSD Settings40 Full-OSD Time Out Adjustment40 Default Surround Mode40 Full-OSD Background Color41 Tuner Operation41 Basic Tuner Operation41 Station Selection41 Preset Tuning42 RDS Operation42 RDS Tuning42 RDS Display Options42 Program Search (PTY)43 Programming the RemoteTable of ContentsTypographical ConventionsIn order to help you use this manual with the remote control, front-panel controls and rear-panelconnections, certain conventions have been used.EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panelconnection jackEXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display1 – (number in a square) indicates a specific front-panel control – (number in a circle) indicates a rear-panel connection0 – (number in an oval) indicates a button or indicator on the remoteThe appearance of the text or cursor for your receiver’s on-screen menus may vary slightly from theillustrations in this manual. Whether the text appears in all uppercase or upper- and lowercasecharacters, performance and operation remain the same.Declaration of ConformityWe, Harman Consumer Group, Inc.2, route de Tours72500 Château-du-Loir,FRANCEdeclare in own responsibility, that the productdescribed in this owner’s manual is in compliancewith technical standards:EN 55013:2001 + A1:2003EN 55020:2002 + A1:2003EN 61000-3-2:2000EN 61000-3-3:1995 + A1:2001EN 60065:2002Jurjen AmsterdamHarman Consumer Group, Inc.06/0743 Programming the Remote with Codes43 Direct Code Entry43 Auto Search Method43 Code Readout44 Macro Programming44 Programmed Device Functions44 Volume Punch-Through45 Channel Control Punch-Through45 Transport Control Punch-Through45 Resetting the Remote Memory46 Function List48 Troubleshooting Guide48 Processor Reset49 Technical Specifications50 Appendix - Settings Worksheet