Harman Kardon AVR 1510 Quick Start Manual

Contents

Harman Kardon AVR 1510 Quick Start Manual Manual pdf 8 page image

AVR8AVR SetupSet Up the AVRInstall the Batteries in the Remote ControlRemove the remote control’s battery cover, insert the two supplied AAA batteries as shown inthe illustration, and replace the battery cover.1. RemoveCover2. InsertBatteries3. ReplaceCoverNOTE: Remove the protective plastic from the AVR’s front panel so it doesn’t reduce theremote control’s effectiveness.Using the Remote ControlYou will be using the following remote-control buttons to configure your AVR:Left/Right/Up/DownButtonsBack/ExitButtonAVRButtonOKButtonOSD/MenuButtonTurn On the AVRPress the front-panel Power button.Power ButtonConfigure the AVR for Your Speakers:AVR 1710/AVR 171/AVR 1610/AVR 161Note: The on-screen menus shown in this guide may differ slightly from your AVR’s actualmenu screens.Before you use your AVR you need to configure it to work with your particular speakersystem. Your AVR’s EZSet/EQ™ Plus system uses the supplied EzSet/EQ microphone todetect the capabilities of each connected speaker and optimize the AVR’s performancefor them automatically. Before beginning, be sure you have correctly connected yourspeakers to the AVR.1. Plug the supplied EzSet/EQ™ microphone into the AVR’s Headphone connector.AVR Headphone ConnectorEzSet Microphone (supplied)2. Place the microphone at ear height in your listening position.3. Turn on your TV and select the TV input where you connected the AVR in Connect YourTV or Video Display, on page 4.4. Press the remote control’s AVR button, then press the OSD/Menu button. The AVR’son-screen display (OSD) setup menu will appear on the TV. (Note: If you have useda composite video connection to your TV, the OSD menus will not appear on your TV.Follow the steps below using the AVR’s front-panel display.)M A S T E R M E N US o u r c e S e l e c tS o u r c e S e t u pS u r r o u n d M o d eS p e a k e r S e t u pZ o n e 2N e t w o r kS y s t e m S e t u p5. Use the remote’s arrow and OK buttons to select “Speaker Setup.”S p e a k e r S e t u pA u t o : E Z S e t / E QM a n u a l S e t u p6. Select “Auto: EZ Set/EQ.”7. Select “Continue.”8. Follow the instructions that appear on the screens. Remain quiet while the test noiseplays through the speakers.

/ 11

Related manuals for Harman Kardon AVR 151/230