Harman Kardon AVR 1565 Quick Start Manual

Also see for AVR 1565: Specifications Owner's manual Owner's manual

Contents

Harman Kardon AVR 1565 Quick Start Manual Manual pdf 6 page image

6AVR 1565/AVR 1566 ConnectionsConnect the Radio Antennas• Connect the supplied FM antenna to the AVR’s FM 75Ω antenna connector. For the bestreception, extend the FM antenna as far as possible.• Bend and fold the base of the supplied AM antenna as shown and connect the antenna wiresto the AVR’s AM and Gnd connectors. (You can connect either wire to either connector.) Rotatethe antenna as necessary to minimize background noise.FM Antenna(supplied)AM Antenna(supplied)Bend and fold baseAVRAntennaConnectorsNOTE: For instructions on connecting the Trigger output to compatible equipment, pleasedownload the AVR 1565/AVR 1566 Owner’s Manual from www.harmankardon.com.Connect to AC PowerConnect the AC power cord to the AVR’s AC Input connector and then to a workingAC power outlet.AVRAC InputConnectorAC PowerOutletPower Cord(supplied)Set Up the AVRInstall the Batteries in the Remote ControlRemove the remote control’s battery cover, insert the three supplied AAA batteries as shown inthe illustration, and replace the battery cover.NOTE: Remove the protective plastic from the AVR’s front panel to keep it from reducingthe remote control’s effectiveness.Turn On the AVR1. Set the rear-panel Main Power switch to “On.” (The front-panel Power indicator willglow amber.)2. Press the front-panel Power button.Main PowerSwitch PowerButtonConfigure Your Speakers1. Turn on your TV and select the TV input where you connected the AVR in Connect YourTV or Video Display, on page 3.2. Press the remote control’s OSD button. The AVR’s on-screen display (OSD) MasterMenu will appear on the TV.** MASTER MENU **INPUT SETUPSURROUND SELECTSPEAKER SETUPSYSTEM SETUPNOTE: If any of the menus disappear (this is done to prevent TV burn-in), press the OSDbutton again.3. Use the remote’s arrow and OK buttons to select “Speaker Setup.” The Speaker Setupmenu will appear.* SPEAKER SETUP *NUMBER OF SPEAKERSSUB MODE : SUBCROSSOVERDISTANCELEVEL ADJUSTBACK TO MASTER MENU4. Select “Number Of Speakers.” The Number Of Speakers menu will appear.* NUMBER OF SPEAKERS *LEFT/RIGHT : ONCENTER : ONSURROUND : ONSUBWOOFER : ONBACK TO MASTER MENU

/ 8

Related manuals for Harman Kardon AVR 1565